Mitsubishi Heavy Industries · reverse cycle split system
Mitsubishi Heavy Industries Avanti split system
Model DXK06ZSA-WF1
Suits roughly 9–18 m² at an average 2.4 m ceiling. 2.7 kW of heating for winter, on R32 refrigerant.
Model DXK09ZSA-WF1
Suits roughly 11–23 m² at an average 2.4 m ceiling. 3.2 kW of heating for winter, on R32 refrigerant.
Model DXK12ZSA-WF1
Suits roughly 16–32 m² at an average 2.4 m ceiling. 3.7 kW of heating for winter, on R32 refrigerant.
Model DXK18ZSA-WF1
Suits roughly 23–46 m² at an average 2.4 m ceiling. 5.8 kW of heating for winter, on R32 refrigerant.
Supply & standard install
From $1,909.53 Inc. GST
From $1,957.21 Inc. GST
From $2,105.88 Inc. GST
From $2,464.78 Inc. GST
Back-to-back installation, single storey, up to 5 metres from the switchboard, within our standard service area.
Prices are before any Victorian Energy Upgrades (VEU) discount. You may be eligible if you are replacing an old air conditioner or disconnecting an old gas heater — ask us when you enquire.
Shop prices apply within about 50 km of Craigieburn. Further out? Send us your details and we'll quote the travel.
What's included
- Unit
- Installation
- Materials
- Certificate of electrical safety
- Certificate of plumbing compliance
Request this install
Name the size and your postcode — Yiannis confirms the install with you.
Sizes and prices
Every size of the Mitsubishi Heavy Industries Avanti, with its model code and installed price.
| Size | Model | Price from (inc. GST) |
|---|---|---|
| 2 kW | DXK06ZSA-WF1 | From $1,909.53 inc. GST |
| 2.5 kW | DXK09ZSA-WF1 | From $1,957.21 inc. GST |
| 3.5 kW | DXK12ZSA-WF1 | From $2,105.88 inc. GST |
| 5 kW | DXK18ZSA-WF1 | From $2,464.78 inc. GST |
The numbers
Straight from the government register every air conditioner sold in Australia must be listed on. Not our marketing — the manufacturer's own test results.
| Model | Cooling | Heating | Indoor noise | AEER | ACOP | Stars | Registration |
|---|---|---|---|---|---|---|---|
| Mitsubishi Heavy Industries DXK06ZSA-WF1 +1 variant | 2 kW | 2.7 kW | 49 dB | 4.73 | 4.71 | 4 / 3.5 | AAC8239 |
| Mitsubishi Heavy Industries DXK09ZSA-WF1 +1 variant | 2.5 kW | 3.2 kW | 53 dB | 4.78 | 4.83 | 4 / 3 | AAC8237 |
| Mitsubishi Heavy Industries DXK12ZSA-WF1 +1 variant | 3.5 kW | 3.7 kW | 57 dB | 4.2 | 4.5 | 4 / 3 | AAC8229 |
| Mitsubishi Heavy Industries DXK18ZSA-WF1 +1 variant | 5 kW | 5.8 kW | 58 dB | 3.57 | 3.86 | 3 / 2.5 | AAC8236 |
Cooling and heating are rated capacity. AEER and ACOP are the annual efficiency figures for cooling and heating — higher is cheaper to run. Stars are shown as cooling / heating for a mixed climate zone, which is the one Melbourne sits in. Indoor noise is the manufacturer's declared sound level for the indoor unit. Every figure is as registered with the Australian Government's GEMS register, and the registration number is there so you can look it up yourself.
Calculator
Is this the right size for your room?
Estimated kW range
—
Fill in the room details above to get an estimate.
Estimate only — not a fixed spec. Final sizing depends on window area, door openings, kitchen appliances and other variables that need a site visit. A Thunderman quote is free.