Skip to content
Thunderman Electrical and Air Conditioning Services Pty Ltd Shop 0434 254 474
Indoor unit of the Mitsubishi Heavy Industries Bronte split system range
Indoor unit of the Mitsubishi Heavy Industries Bronte range. Size and details vary by model.

Mitsubishi Heavy Industries · reverse cycle split system

Mitsubishi Heavy Industries Bronte split system

Model DXK24ZRA-WF1

Suits roughly 33–65 m² at an average 2.4 m ceiling. 8 kW of heating for winter, on R32 refrigerant.

Supply & standard install

From $2,892.13 Inc. GST

Back-to-back installation, single storey, up to 5 metres from the switchboard, within our standard service area.

Prices are before any Victorian Energy Upgrades (VEU) discount. You may be eligible if you are replacing an old air conditioner or disconnecting an old gas heater — ask us when you enquire.

Shop prices apply within about 50 km of Craigieburn. Further out? Send us your details and we'll quote the travel.

What's included

  • Unit
  • Installation
  • Materials
  • Certificate of electrical safety
  • Certificate of plumbing compliance

Request this install

Name the size and your postcode — Yiannis confirms the install with you.

Sizes and prices

Every size of the Mitsubishi Heavy Industries Bronte, with its model code and installed price.

Size Model Price from (inc. GST)
7.1 kW DXK24ZRA-WF1 From $2,892.13 inc. GST
8 kW DXK28ZRA-WF1 From $3,314.24 inc. GST
9.5 kW DXK33ZRA-WF1 From $3,771.45 inc. GST

The numbers

Straight from the government register every air conditioner sold in Australia must be listed on. Not our marketing — the manufacturer's own test results.

Model Cooling Heating Indoor noise AEER ACOP Stars Registration
Mitsubishi Heavy Industries DXK24ZRA-WF1 +1 variant 7.1 kW 8 kW 55 dB 3.83 3.94 3.5 / 2.5 AAC8233
Mitsubishi Heavy Industries DXK28ZRA-WF1 +1 variant 8 kW 9 kW 58 dB 3.58 3.73 3.5 / 2.5 AAC8227
Mitsubishi Heavy Industries DXK33ZRA-WF1 +1 variant 9.5 kW 10.3 kW 61 dB 3.69 3.88 3.5 / 2.5 AAC8238

Cooling and heating are rated capacity. AEER and ACOP are the annual efficiency figures for cooling and heating — higher is cheaper to run. Stars are shown as cooling / heating for a mixed climate zone, which is the one Melbourne sits in. Indoor noise is the manufacturer's declared sound level for the indoor unit. Every figure is as registered with the Australian Government's GEMS register, and the registration number is there so you can look it up yourself.

Check it yourself. Each size is registered on the Australian energy rating register; the registration numbers are in the table above. Every number is the manufacturer's own test result lodged there — not ours. Source: GEMS registration database (Australian Government)

Calculator

Is this the right size for your room?

Estimated kW range

—

Fill in the room details above to get an estimate.

Estimate only — not a fixed spec. Final sizing depends on window area, door openings, kitchen appliances and other variables that need a site visit. A Thunderman quote is free.